Request a Quote on Lockheed Martin Corporation Part Number 1214D0925 Listed with the NSN 5340012197274

Part Number: 1214D0925

Manufacturer: Lockheed Martin Corporation

NSN: 5340-01-219-7274

NIIN: 012197274

Item Name : Bracket Angle

CAGE Code: 03538

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

If you are in search of high-quality Lockheed Martin Corporation Bracket Angle items that are listed under the NSN 5340-01-219-7274, we have you covered here on Expansive NSN Procurement. The particular NSN product that you have taken an interest in is part number 1214D0925, and it is readily available for purchase from our website at any time. If you would like to learn more about this part or simply wish to begin the first steps of the procurement process, be sure to complete the RFQ form provided on this page at your earliest convenience. Once our team has received and reviewed a completed submission, you can expect to receive a response in 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make searching for parts on our expansive inventory easy, we list items alongside numerous classifications and designations. For example, this Lockheed Martin Corporation item is specifically produced under the CAGE Code 03538, and it belongs to the FSC 5340 Hardware Commercial. As you can also procure these part numbers under specific NSNs, you can always rest assured that you are receiving the exact products you require with every purchase. Get started on the procurement process for NSN 5340-01-219-7274 and other items of interest today and see why so many customers steadily depend on us for all their operational needs.

NSN Information for Part Number 1214D0925 with NSN 5340-01-219-7274, 5340012197274

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-219-7274 Item PartTypeName: BRACKET,ANGLE	5340	012197274	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1214D0925	5	2	3

Characteristics Data of NSN 5340-01-219-7274, 5340012197274

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN
ADLK	FIRST LEG LENGTH	2.000 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	2.000 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	2.000 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.326 INCHES MINIMUM AND 0.333 INCHES MAXIMUM
AHLT	SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	8.625 INCHES NOMINAL
AHLU	SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH	8.625 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.250 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.750 INCHES NOMINAL
AHLZ	SECOND LEG SLOT LENGTH	0.750 INCHES NOMINAL
AHMA	SECOND LEG SLOT WIDTH	0.312 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.250 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.250 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	2.000 INCHES NOMINAL
AHQY	FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	8.625 INCHES NOMINAL
AHQZ	FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH	8.625 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.250 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.750 INCHES NOMINAL
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	THREE HOLES
AKBU	SECOND LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	3 SLOTS
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	THREE NUT PLATES RIVETED TO FIRST LEG
MATT	MATERIAL	ALUMINUM ALLOY 6061
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	PAINT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	CID STD 0985A0160,FSCM 54497 MFR REF SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ANGLE